The scope of application of aluminum alloy doors and windows equipment is relatively wide. How much do you know about aluminum alloy doors and windows? The installation of aluminum alloy doors and windows equipment needs to pay attention to the following points:
1. Equipment: Due to the numerous classifications of aluminum alloy door and window equipment, each type of equipment may have several machines. It is particularly important for the inspection of door and window equipment, such as the trachea plug of the cutting saw, the speed of the saw blade, the working status of the saw head, etc. Wait.
2. Electricity: Since the commonly used voltage of aluminum alloy door and window equipment is 380V, everyone must pay attention to the connection of the live wire and the neutral wire when wiring. Generally speaking, door and window equipment manufacturers will separate the colors, and the live wire is black or blue , The zero wire is red (each factory depends on its own situation). If the live wire is reversed, just switch the two wires at both ends of the live wire.
3. Air source: Since the pressing material of aluminum alloy door and window equipment is compressed by cylinder, ensuring sufficient air supply is a prerequisite for the efficient use of the equipment. If the air pressure is not reached, double-head cutting saw for broken bridge aluminum profile The entry and exit of the saw blade will be affected, and the corresponding processing effect will also be affected. Generally speaking, a set of aluminum alloy doors and windows equipment must ensure that the air pressure can reach 8 pressures and the air supply flow rate can reach 0.3. If there are too many equipment, just rely on The air pump is not enough, you need to prepare one or two gas storage tanks.