Aluminum alloy door and window equipment has a wide range of uses. How much do you know about aluminum alloy doors and windows? The following points should be noted when installing aluminum alloy door and window equipment:

1. Equipment: Since there are many types of aluminum alloy door and window equipment, each type of equipment may have several machines. It is particularly important to check the door and window equipment, such as the air pipe plug of the cutting saw, the speed of the saw blade in and out, the left and right working status of the saw head, etc.

2. Electricity: Since the common voltage of aluminum alloy door and window equipment is 380V, you must pay attention to the connection of the live wire and the neutral wire when wiring. Generally speaking, the door and window equipment manufacturers will distinguish the colors, the live wire is black or The live wire is blue, and the neutral wire is red (depending on the factory's situation). If the live wire is connected in reverse, just swap the two wires at both ends of the live wire.

3. Gas source: Since the pressing materials of aluminum alloy door and window equipment are all compressed by cylinders, ensuring sufficient gas supply is a prerequisite for efficient use of the equipment. If the air pressure is not reached, the saw blade of the double-headed cutting saw for broken bridge aluminum profiles will be affected, and the processing effect will also be affected accordingly. Generally speaking, a set of aluminum alloy door and window equipment must ensure that the air pressure can reach 8 pressures and the air supply flow rate reaches 0.3. If there are too many devices, it is not enough to rely on air pumps alone, and you need to prepare one or two gas tanks.

Last Article：Material classification of panel furniture.

Next Article：No More